Arp List - TP-Link Archer C5 User Manual

1. Click the Find button in Figure 5-88.
2. Enter the MAC Address or IP Address.
3. Click the Find button in Figure 5-90.
Click the Enable All button to make all entries enabled.
Click the Delete All button to delete all entries.
5.16.2

ARP List

Choose menu "Advanced→IP & MAC Binding→ARP List", you can see the ARP List, showing
all the existing IP & MAC Binding entries as shown in Figure 5-91. To manage the computer, you
could observe the computers in the LAN by checking the relationship of MAC address and IP
address on the ARP list, and you could also configure the items on the ARP list.
1. MAC Address - The MAC address of the controlled computer in the LAN.
IP Address - The assigned IP address of the controlled computer in the LAN.
2.
3. Status - Indicates whether or not the MAC and IP addresses are bound.
4. Configure - Load or delete an item.
Load - Load the item to the IP & MAC Binding list.

Delete - Delete the item.

Click the Bind All button to bind all the current items, available after enable.
Click the Load All button to load all items to the IP & MAC Binding list.
Click the Refresh button to refresh all items.
Archer C5
Figure 5-90 Find IP & MAC Binding Entry
Figure 5-91 ARP List
- 98 -
AC1200 Wireless Dual Band Gigabit Router