Wps - TP-Link Archer C5 User Manual

SSID (to be bridged) - The SSID of the AP your router is going to connect to as a client.

You can also use the Survey function to select the SSID to join.
MAC Address (to be bridged) - The MAC address (BSSID) of the AP your router is

going to connect to as a client. You can also use the Survey function to select the MAC
address (BSSID) to join.
Survey - Click this button, you can search the APs that run in all channels.

Key type - This option should be chosen according to the AP's security configuration.

WEP Index - This option should be chosen if the key type is WEP. It indicates the index

of the WEP key.
Auth Type - This option should be chosen if the key type is WEP. It indicates the

authorization type of the Root AP.
Password - If the AP your router is going to connect needs password, you need to fill

the password in this blank.
5.4.2

WPS

Choose menu "Advanced→Wireless 2.4GHz→WPS", you can see the screen as shown in
Figure 5-15. This section will guide you to add a new wireless device to an existing network
quickly by WPS (Wi-Fi Protected Setup) function.
WPS Status - Enable or disable the WPS function here.

Current PIN - Displays the current value of the router's PIN. The default PIN of the router

can be found in the label or User Guide.
Restore PIN - Restore the PIN of the router to its default value.

Gen New PIN - Click this button, and then you can get a new random value for the router's

PIN. You can ensure the network security by generating a new PIN.
Add device - You can add a new device to the existing network manually by clicking this

button.
Archer C5 AC1200 Wireless Dual Band Gigabit Router
Figure 5-15 WPS
- 39 -