Firmware Upgrade - TP-Link Archer C5 User Manual

IP Address/Domain Name - Enter the IP Address or Domain Name of the PC whose

connection you wish to diagnose.
Pings Count - Specifies the number of Echo Request messages sent. The default is 4.

Ping Packet Size - Specifies the number of data bytes to be sent. The default is 64.

Ping Timeout - Time to wait for a response, in milliseconds. The default is 800.

Traceroute Max TTL - Set the maximum number of hops (max TTL to be reached) in the

path to search for the target (destination). The default is 20.
Click Start to check the connectivity of the Internet.
The Diagnostic Results page displays the result of diagnosis.
If the result is similar to the following screen, the connectivity of the Internet is fine.

Note:
1. Only one user can use the diagnostic tools at one time.
2. "Ping Count", "Ping Packet Size" and "Ping Timeout" are Ping Parameters, and "Traceroute
Max TTL" is Traceroute Parameter.
5.19.3

Firmware Upgrade

Choose menu "Advanced→System Tools→Firmware Upgrade", and then you can update the
latest version of firmware for the router on the following screen.
Archer C5 AC1200 Wireless Dual Band Gigabit Router
Figure 5-110 Diagnostic Results
Figure 5-111 Firmware Upgrade
- 114 -