TP-Link Archer C5 User Manual page 52

Disable Security - If you do not want to use wireless security, check this radio button. But it's

strongly recommended to choose one of the following modes to enable security.
WPA/WPA2-Personal - It's the WPA/WPA2 authentication type based on pre-shared

passphrase. The router is configured by this security type by default.
Version - You can choose the version of the WPA-PSK or WPA2-PSK security on the

drop-down list. The default setting is WPA2-PSK.
Encryption - You can select either TKIP or AES as Encryption. The default setting is

AES.

Note:
If you check the
find a notice in red as shown in
Archer C5
Figure 5-17 Wireless Security
WPA/WPA2-Personal
Figure
AC1200 Wireless Dual Band Gigabit Router
radio button and choose TKIP encryption, you will
5-18.
- 41 -