Dual Band Selection - TP-Link Archer C5 User Manual

MAC Address - The physical address of the router, as seen from the LAN. The value can't

be changed.
IP Address - Enter the IP address of your router or reset it in dotted-decimal notation

(factory default: 192.168.0.1).
Subnet Mask - An address code that determines the size of the network. Normally use

255.255.255.0 as the subnet mask.
IGMP Proxy - If you want to watch TV through IGMP, please enable it.


Note:
1) If you change the IP Address of LAN, you must use the new IP Address to log in the router.
2) If the new LAN IP Address you set is not in the same subnet, the IP Address pool of the DHCP
server will change accordingly at the same time, while the Virtual Server and DMZ Host will
not take effect until they are re-configured.
5.3

Dual Band Selection

Choose menu "Advanced→Dual Band Selection", and you can choose the working frequency
for your router. It is recommended that your computers and devices running video and voice
applications use the 5GHz band, while your guest access and computers that are only browsing
the web use the 2.4GHz band.
Archer C5 AC1200 Wireless Dual Band Gigabit Router
Figure 5-10 LAN
Figure 5-11 Dual Band Selection
- 36 -