Arp List - TP-Link TL-WR842N User Manual

To add IP & MAC Binding entries, follow the steps below.
1. Click the Add New... button as shown in Figure 4-93.
2. Enter the MAC Address and IP Address.
3. Select the Bind checkbox.
4. Click the Save button to save it.
To modify or delete an existing entry, follow the steps below.
1. Find the desired entry in the table.
2. Click Modify or Delete as desired on the Modify column.
To find an existing entry, follow the steps below.
1. Click the Find button as shown in Figure 4-93.
2. Enter the MAC Address or IP Address.
3. Click the Find button in the page as shown in Figure 4-95.
Click the Enable All button to make all entries enabled.
Click the Delete All button to delete all entries.

4.17.2 ARP List

To manage the computer, you could observe the computers in the LAN by checking the
relationship of MAC address and IP address on the ARP list, and you could also configure the
items on the ARP list. This page displays the ARP List; it shows all the existing IP & MAC Binding
entries (shown in Figure 4-96).
1. MAC Address - The MAC address of the controlled computer in the LAN.
IP Address - The assigned IP address of the controlled computer in the LAN.
2.
TL-WR842N 300Mbps Multi-Function Wireless N Router User Guide
Figure 4-95 Find IP & MAC Binding Entry
Figure 4-96 ARP List
- 95 -