TP-Link Archer C5 User Manual page 71

Access And Bandwidth Control

Allow Guests to See Each Other - If this checkbox is selected, anyone who connects to

the guest network can communicate with each other.
Allow Guests To Access My Local Network - If this checkbox is selected, anyone who

connects to the guest network has access to your local network, not just Internet access.
Enable Guest Network Bandwidth Control - If this checkbox is selected, the Guest

Network Bandwidth Control rules will take effect.
1) Egress Bandwidth For Guest Network - Specify the upload speed through the
WAN port for Guest Network.
2) Ingress Bandwidth For Guest Network - Specify the download speed through the
WAN port for Guest Network.
Wireless 2.4GHz

Enable Guest Network (2.4G) - Select this checkbox to enable 2.4GHz guest network.

Network Name - Enter a value of up to 32 characters. The same Name (SSID) must be

assigned to all wireless devices in your Guest Network.
Guest Number - Limit the number of the guest.

Wireless Security - You can configure the security of Guest Network here.

Access Time - During this time the wireless stations could access the AP.

Wireless 5GHz

Enable Guest Network (5G) - Select this checkbox to enable 5GHz guest network.

Network Name - Enter a value of up to 32 characters. The same Name (SSID) must be

assigned to all wireless devices in your Guest Network.
Guest Number - Limit the number of the guest.

Wireless Security - You can configure the security of Guest Network here.

Access Time - During this time the wireless stations could accessing the AP.


Note:
The range of bandwidth for Guest Network is calculated according to the setting of Bandwidth
Control on the page "Bandwidth Control->Control Settings".
Archer C5 AC1200 Wireless Dual Band Gigabit Router
- 60 -