Wps Device Screen - ZyXEL Communications NBG6515 User Manual

Figure 72 Network > Wireless LAN 2.4G/5G > WPS
The following table describes the labels in this screen.
Table 45 Network > Wireless LAN 2.4G/5G > WPS
LABEL
WPS Setup
Enable WPS
Enable PIN
PIN Number
WPS Status
Status
Release
Configuration
802.11 Mode
SSID
Security
Apply
Reset

11.10 WPS Device Screen

Use this screen when you want to add a wireless station using WPS. To open this screen, click
Network > Wireless LAN 2.4G or Wireless LAN 5G > WPS Station tab.
Chapter 11 Wireless LAN
DESCRIPTION
Select this to enable the WPS feature.
Select this to enable the WPS feature.
This displays a PIN number last time system generated. Click Generate to generate a
new PIN number.
This displays Configured when the NBG has connected to a wireless network using WPS
or when Enable WPS is selected and wireless or wireless security settings have been
changed. The current wireless and wireless security settings also appear in the screen.
This displays Unconfigured if WPS is disabled and there are no wireless or wireless
security changes on the NBG or you click Release_Configuration to remove the
configured wireless and wireless security settings.
This button is only available when the WPS status displays Configured.
Click this button to remove all configured wireless and wireless security settings for WPS
connections on the NBG.
This is the 802.11 mode used. Only compliant WLAN devices can associate with the NBG.
This is the name of the wireless network.
This is the type of wireless security employed by the network.
Click Apply to save your changes back to the NBG.
Click Reset to begin configuring this screen afresh.
NBG6515 User's Guide
92