Advanced Screen - ZyXEL Communications NBG6515 User Manual

Table 56 Network > DHCP Server > General (continued)
LABEL
Apply
Reset

15.4 Advanced Screen

This screen allows you to assign IP addresses on the LAN to specific individual computers based on
their MAC addresses. You can also use this screen to configure the DNS server information that the
NBG sends to the DHCP clients.
To change your NBG's static DHCP settings, click Network > DHCP Server > Advanced. The
following screen displays.
Figure 87 Network > DHCP Server > Advanced
The following table describes the labels in this screen.
Table 57 Network > DHCP Server > Advanced
LABEL
Add Application Rule
IP Address
MAC Address
LAN Static DHCP Table
#
IP Address
MAC Address
Modify
DNS Server
Chapter 15 DHCP Server
DESCRIPTION
Click Apply to save your changes back to the NBG.
Click Reset to begin configuring this screen afresh.
DESCRIPTION
Type the LAN IP address based on the MAC address in dotted decimal notation.
Type the MAC address (with colons) you want to assign to your NBG
This is the index number of the static IP table entry (row).
Type the LAN IP address of a computer on your LAN.
Type the MAC address (with colons) of a computer on your LAN.
Click the Edit icon to open the edit screen where you can modify an IP address.
Click the Delete icon to remove an IP address.
NBG6515 User's Guide
115