Flash Drive Menu - Toshiba eS305CS User Manual

Understanding the printer menus
Use
Factory Defaults
Do Not Restore
Restore Now
Export Configuration File
Export

Flash Drive menu

Use
Copies
1–999
Paper Source
Tray [x]
Multipurpose Feeder
Manual Paper
Manual Envelope
Color
Color
Black Only
Collate
(1,1,1) (2,2,2)
(1,2,3) (1,2,3)
Sides (Duplex)
1 sided
2 sided
Duplex Binding
Long Edge
Short Edge
To
Use the printer factory default settings.
Notes:
•
Do Not Restore is the factory default setting.
•
Restore Now sets all printer settings to the factory default
settings except for the Network/Ports menu settings. All
downloads stored in the RAM are deleted. Downloads stored
in the flash memory or on a hard disk are not affected.
Export configuration files to a flash drive.
To
Specify a default number of copies for each print job.
Note: 1 is the factory default setting.
Set a default paper source for all print jobs.
Note: Tray 1 is the factory default setting.
Generate color or black‑and‑white outputs.
Notes:
•
Color is the factory default setting.
•
This setting can generate color output only from a flash drive print job.
Stack the pages of a print job in sequence when printing multiple copies.
Note: "(1,2,3) (1,2,3)" is the factory default setting.
Specify whether prints are on one side or on both sides of the paper.
Note: "1 sided" is the factory default setting.
Define binding for duplexed pages in relation to paper orientation.
Notes:
•
Long Edge is the factory default setting. Long Edge assumes binding along the
long edge of the page (left edge for portrait and top edge for landscape).
•
Short Edge assumes binding along the short edge of the page (top edge for
portrait and left edge for landscape).
97