Toshiba eS305CS User Manual page 162

Troubleshooting
Note: Downloaded fonts and macros that are not previously stored in the flash memory are deleted.
Non-Printer Manufacturer [color] [supply type], see User's Guide [33.xy]
Note: The supply type can be a toner cartridge or the imaging kit.
The printer has detected an unrecognized supply or part installed in the printer.
Your printer is designed to function best with genuine supplies and parts made by the printer manufacturer. Use of
third-party supplies or parts may affect the performance, reliability, or life of the printer and its imaging components.
All life indicators are designed to function with supplies and parts, and may deliver unpredictable results if third-party
supplies or parts are used. Imaging component usage beyond the intended life may damage your printer or its associated
components.
Warning—Potential Damage: Use of third-party supplies or parts can affect warranty coverage. Damage caused by
the use of third-party supplies or parts may not be covered by the warranty.
To accept any and all of these risks, and to proceed with the use of non-genuine supplies or parts in your printer, press
and hold and the # button on the printer control panel simultaneously for 15 seconds.
For non‑touch‑screen printer models, press
continue printing.
If you do not want to accept these risks, then remove the third-party supply or part from your printer, and then install
a genuine supply or part.
Note: For the list of supported supplies, visit our Web site or contact the place where you purchased the printer.
PPDS font error [50]
Try one or more of the following:
•
From the printer control panel, select Continue to clear the message and continue printing. For non‑touch‑screen
printer models, press
•
If the printer cannot find the requested font, then from the printer control panel, navigate to:
PPDS menu > Best Fit > On
The printer will find a similar font and reformat the affected text.
•
Cancel the current print job.
Reinstall missing or unresponsive [color] cartridge [31.xy]
Try one or more of the following:
•
Install the missing toner cartridge. For more information, see the "Replacing supplies" section of the User's Guide.
•
Remove the unresponsive cartridge, and then reinstall it.
Note: If the message appears after reinstalling the supply, then the cartridge may be defective. Replace the
cartridge.
and
to confirm.
simultaneously for 15 seconds to clear the message and
162