Custom Types Menu; Custom Names Menu; Universal Setup Menu - Toshiba eS305CS User Manual

Understanding the printer menus
Use
Custom [x] Loading
Duplex
Off
Notes:
•
Duplex sets the printer default to two‑sided printing for every print job unless one‑sided printing is selected from
Printing Preferences or the Print dialog.
•
Off is the factory default setting for all the menus.

Custom Types menu

Custom Names menu

Use
Custom Name [x]

Universal Setup menu

Use
Units of Measure
Inches
Millimeters
Portrait Width
3–8.5 inches
76–216 mm
Portrait Height
3–14.17 inches
76–360 mm
To
Determine and set two‑sided printing for all print jobs that specify
Custom [x] as the paper type.
Note: Custom [x] Loading is available only when the custom type is
supported.
To
Specify a custom name for a paper type. This name replaces Custom Type [x] in
the printer menus.
To
Identify the units of measure.
Notes:
•
Inches is the US factory default setting.
•
Millimeters is the international factory default setting.
Set the width for portrait orientation.
Notes:
• If the width exceeds the maximum, then the printer uses the
maximum width allowed.
• 8.5 inches is the US factory default setting. You can increase the
width in 0.01‑inch increments.
• 216 mm is the international factory default setting. You can increase
the width in 1‑mm increments.
Set the width for portrait orientation.
Notes:
• If the height exceeds the maximum, then the printer uses the
maximum height allowed.
• 14 inches is the US factory default setting. You can increase the
height in 0.01‑inch increments.
• 356 mm is the international factory default setting. You can increase
the height in 1‑mm increments.
75