Table of Contents
Advertisement
Caller ID
Caller ID operation
Save a caller ID log entry to the directory
1. When in the caller ID log, press q
/SELECT to select an entry. The screen displays EDIT NUMBER.
2. Press
MENU
3. Use the dialing keys to edit the number.
•
Press q
CID
•
Press
MUTE
•
Press and hold
•
Press and hold
(a p appears).
4. Press
/SELECT to move to the name. The screen displays EDIT NAME.
MENU
Use the dialing keys (page 40) to edit the name.
•
Press q
CID
•
Press
MUTE
•
Press and hold
Press # (pound key) to move the last word to the front. For example,
•
Johnson Charlie becomes Charlie Johnson when you press #.
•
Press a>A to change the next letter to upper or lower case.
/SELECT when done. The handset shows Saved.
5. Press
MENU
NOTES:
•
You might need to change how a caller ID number is dialed if the entry does not appear in the
correct format. Caller ID numbers might appear with an area code that is not necessary for
local calls, or without a 1 that is necessary for long distance calls (see View dialing options on
page 51).
•
If the name you received from the telephone service provider is all in capital letters, the first
letter of every word remains a capital letter, while other letters become lower case. However, the
next letter after the prefix "Mac", "Mc", or "O'", is kept as a capital letter. For example, the "D" in
"MacDonald" is kept as a capital letter.
•
If the telephone number from the caller ID information has already been saved in the directory
under a different name, the new name will overwrite the old one.
or p
to move the cursor to the left or right.
DIR
/DELETE to backspace and erase a digit.
/DELETE to erase the entire entry.
MUTE
/PAUSE to insert a three-second dialing pause
REDIAL
or p
to move the cursor to the left or right.
DIR
/DELETE to erase a character.
/DELETE to erase all characters.
MUTE
or p
to browse.
CID
DIR
52
Advertisement
Table of Contents
