Zone Alarm - Lowrance X102C Operation Instructions Manual

4. Press ← to
5. To turn off the alarm, press
To switch to a different depth setting, open the Sonar Alarms menu and
repeat the instructions in step 3 above.
To adjust and turn on the deep alarm
1. . Press the
and use ↑ or ↓ to select Sonar Alarms, then press
2. Press ↓ to
D
3. Press ↑ or ↓ to change the first number, then press → to move the
cursor to the next number and repeat until the depth is correct, then
press .
ENT
4. Press ← to
5. To turn off the alarm, Press the
press |
MENU MENU
. Press ↓ to
ENT
To switch to a different depth setting, open the Sonar Alarms menu and
repeat the instructions in step 3 above.

Zone Alarm

The zone alarm is triggered when any echo passes inside the zone
alarm bar, shown on the right side of the screen.
To adjust and turn on the zone alarm
1. Press the
A
use ↑ or ↓ to select Sonar Alarms, then press
2. Press ↓ to
Z
Left, Sonar Alarms menu, with Adjust Zone command selected.
Right, Adjust Zone Alarm selection box, with Upper selected.
3. To set the upper boundary for the Zone Alarm, use ← or→ to select
, then press ↑ or ↓ to move the top of the bar to the desired depth.
U
PPER
S A
HALLOW LARM
key on the front of the unit or press
A
LARM
A E
EEP LARM NABLED
D A E
EEP LARM NABLED
and use ↑ or ↓ to select Sonar Alarms, then press
D A E
EEP LARM
key on the front of the unit or press
LARM
A E
ONE LARM NABLED
| |
E ENT
NABLED
| |
A ENT
LARM
|→ to
D
EEP
| |
ENT EXIT
A
LARM
| |
ENT EXIT
NABLED
|→ to
A
DJUST
47
.
EXIT
.
EXIT
.
ENT
|
A D
LARM EPTH
.
key on the front of the unit or
.
MENU
.
ENT
| .
Z ENT
ONE
|
MENU MENU
.
ENT
| and
MENU