Power Connections - Lowrance X102C Operation Instructions Manual

Sonar socket
SP-BL optional
speed sensor
Transducer

Power Connections

Your unit comes with a power/data cable that splits into three ends,
each with several exposed wires (shown in the following figure). The
end with 4 wires (blue, yellow, orange and shield will not be used with
your unit. The end with three wires (red, black and shield) is a power
cable that connects to a NMEA 2000 buss. The thicker three-wire cable
(red, black and white) is the Power Supply for your unit (and optional
Network socket
NMEA 2000
buss adapter
cable
Sonar unit cable connections.
Power Supply
cable
To NMEA 2000
buss
24
Sonar unit,
rear view
Power/Data socket
NMEA 0183
data cable
Unused
wires
NMEA 2000
Power cable