To Adjust And Turn On The Deep Alarm; Zone Alarm; To Adjust And Turn On The Zone Alarm - Lowrance X96 Installation And Operation Instructions Manual

4. Press ← to
5. To turn off the alarm, press
To switch to a different depth setting, open the Sonar Alarms menu and
repeat the instructions in step 3 above.

To adjust and turn on the deep alarm:

1. Press
A
LARM
2. Press ↓ to
D
3. Press ↑ or ↓ to change the first number, then press → to move the
cursor to the next number and repeat until the depth is correct, then
press .
ENT
4. Press ← to
5. To turn
| |
E ENT
NABLED
To switch to a different depth setting, open the Sonar Alarms menu and
repeat the instructions in step 3 above.

Zone Alarm

The zone alarm is triggered when any echo passes inside the zone
alarm bar, shown on the right side of the screen.

To adjust and turn on the zone alarm:

1. Press
A
LARM
2. Press ↓ to
Z
Sonar Alarms menu (left) with Adjust Zone command selected.
Adjust Zone Alarm selection box, with Upper selected (right).
3. To set the upper boundary for the Zone Alarm, use ← or→ to select
, then press ↑ or ↓ to move the top of the bar to the desired depth.
U
PPER
S A
HALLOW LARM
.
A E
EEP LARM NABLED
D A E
EEP LARM NABLED
off the alarm,
.
EXIT
.
A E
ONE LARM NABLED
| |
E ENT
NABLED
| |
A ENT
LARM
|→ to Deep Alarm
| |
ENT EXIT
press
|→ to
A
DJUST
41
.
EXIT
| .
ENT EXIT
|
D
EPTH
.
|↓ to
A
LARM
| .
Z ENT
ONE
.
ENT
D A
EEP LARM