Additional Set Up; Stabilizer Jacks; Slideout Room (Certain Models) - Jayco Eagle 2006 Owner's Manual

Additional Set Up

STABILIZER JACKS

1. Insert the crank onto the stabilizer jack shaft.
2. Turn it clockwise to lower the jack. Continue lowering the jack until the frame of the
trailer begins to rise slightly.
3. Equalize the jacks for best support. This may require that you adjust each jack several
times. When not parked on cement, you may wish to place a wood or hard plastic
block under the jack for convenience.
I
WARNING: DO NOT USE THE STABILIZER JACKS TO LEVEL
THE UNIT. It is important to remember that the stabilizer jacks are to
be used only for support while occupying and moving around the
trailer. They are not designed to bear the weight of the trailer.

SLIDEOUT ROOM (CERTAIN MODELS)

The slideout room is designed for additional floor space and comfort. Mechanical
components are gear driven. Read ALL slideout instructions before operation.
I
CAUTION: Do not place excessive weight in the slideout room. It can
cause the slideout room to malfunction and cause damage to the
slideout.
I
WARNING:
V Ensure that the trailer is level before operating the slideout room.
Water leaks and other problems could result if the slideout is operated
without leveling the trailer.
V Ensure there are no people or obstructions blocking the path of the
room when it is moving.
V Keep away from the slide rails when the room is in motion.
V The gear assembly may pinch or catch on loose clothing causing
personal injury.
V Ensure the slideout is in the closed position prior to hooking the unit to
the tow vehicle.
FAILURE TO FOLLOW THESE INSTRUCTIONS COULD RESULT IN
SERIOUS INJURY OR DEATH.
Eagle Conventional Travel Trailer and Fifth-Wheel Travel Trailer
Setting Up Camp...
41