Lowrance LMS-520C Installation And Operation Instructions Manual page 153

1. From the
press |
MENU MENU
2. Press ↓ to
(E
appears with the cursor showing.
Edit Route menu (left). Edit Route Waypoints menu (right)
3. Use the Zoom keys and arrow keys to move the map and cursor until
the cursor is centered on the spot where you want your route to begin.
(If you are starting at your current position or the current cursor posi-
tion, you are already at the starting spot.)
1.
Route creation sequence, from left: Fig. 1. Set route waypoint (1) at
11th St. & 145th Ave. Fig. 2. Zoom in; move cursor north to set point (2)
at 145th & Admiral. Fig. 3. With point (2) set, move cursor east to mark
interstate on-ramp with waypoint (3). In figures 2 and 3, notice the
rubber band line extending from the previously set waypoint to the
cursor. This line will become the course for the route.
N P
AVIGATION AGE
|↓ to
R
OUTE
|
R )
ND OF OUTE
with Add From Map command selected.
, press
MENU
|
P ENT
LANNING
|↓ to
ENT A
DD
2.
143
| or from the
ENT
| .
ENT
|
F M ENT
ROM AP
M P
AP AGE
. The Map Page
3.
,