Coordinate System Selection - Lowrance iFINDER M-M Operation Instructions Manual

1. Press
MENU
2. Press ↓ to
3. A menu appears showing the prefixes of the available NMEA sen-
tences. A check mark next to a prefix means the prefix is in use. Use ↑
↓ → ← to select a prefix, then press
again to check the box and turn a prefix on.)
ENT
Configure NMEA menu, showing all prefixes turned on (checked).
NOTE:
The names of the NMEA sentences are abbreviated in this menu.
These are the functions of the various selectable prefixes:
• GLL transmits latitude and longitude of present position, time of
position fix, and status.
• RMC and RMB transmits navigation information messages.
• APB transmits autopilot information.
• GGA transmits time, position, and fix related data.
• GSA and GSV transmits fix mode, DOP values, and satellites in
view information.
4. When the desired prefixes are checked or unchecked, press
| |
EXIT EXIT EXIT

Coordinate System Selection

The Coordinate System Menu lets you select the coordinate system to
use when displaying and entering position coordinates.
offered by www.Busse-Yachtshop.de
| |↓ to
MENU S
| |↓ to
C P ENT
OM ORT
| to return to the previous page.
EXIT
|
S ENT
YSTEM ETUP
C NMEA
ONFIGURE
to turn off the prefix. (Press
ENT
56
email: info@busse-yachtshop.de Tel: +49 (0)4347 908234
.
| .
ENT