Create Waypoint At Current Position; Create A Man Overboard Waypoint; Create A Waypoint By Average Position; Create A Waypoint By Projecting A Position - Lowrance iFINDER M-M Operation Instructions Manual

2. Press
ENT
name with a sequential number, such as "waypoint 001." The waypoint
symbol and number appear on the map.

Create Waypoint at Current Position

1. While you are traveling, press
automatically given a name with a sequential number, such as "way-
point 002." The waypoint symbol and number appear on the map.

Create a Man Overboard Waypoint

This unit has a man overboard feature that shows navigation data to
the location where the feature was activated. To activate it, press the
and
ZOUT ZIN
keys are pressed is used as the man overboard position. The unit auto-
matically begins navigating to the MOB waypoint. For further details,
read the discussion of the Man Overboard feature under the heading
"Navigation" earlier in this section.

Create a Waypoint by Average Position

This feature sets a waypoint at the current position after taking several
position readings and averaging them. This boosts waypoint position
accuracy by helping to eliminate errors caused by atmospheric condi-
tions and other factors.
1. Press
ENT
)|
C ENT
REATE
2. Wait while the unit takes points to average for the position. (The greater
the number of points, the greater the accuracy.) When the desired number
of points accumulates, press
3. The Edit Waypoint menu appears. You can simply save the waypoint
by pressing
EXIT

Create a Waypoint by Projecting a Position

This feature sets a waypoint at a point located a specific distance and
bearing from a reference position. The reference position can be se-
lected from your waypoint list, a map feature or from the Points of In-
terest list.
1. Press
ENT
)|
C ENT
REATE
2. Press ↓ to
feature or Point of Interest. When the point has been selected, press
and the point's position appears as the reference position.
ENT
offered by www.Busse-Yachtshop.de
| . The waypoint is saved and automatically given a
ENT
keys at the same time. Your position at the time these
|↓ to
A
VERAGE
.
| or you can edit the waypoint.
EXIT
|↓ to
P
ROJECTED
.
|
S R
ET EFERENCE
|
ENT ENT
|
P ENT
OSITION
to create and save the waypoint.
ENT
|
P ENT
OSITION
. Use ↑ and ↓ to select a waypoint, map
ENT
50
email: info@busse-yachtshop.de Tel: +49 (0)4347 908234
. The waypoint is saved and
|(cursor jumps to highlight
|(cursor jumps to highlight