Overylay Data Style - Lowrance GlobalMap Baja 840C Operation Instructions Manual

3. The data begins to flash on your screen. Use any combination of →,
←, ↑ and ↓ to move the data to a new location on the screen.
4. When satisfied, press | .
EXIT EXIT
To resize overlaid data: press | to | . This will
↓
MENU O D ENT
VERLAY ATA
bring up the Overlay Data Shown menu with a list of the current over-
lay data. Use → ← to toggle the size of the data between small, me-
dium, large and enormous. When you are satisfied with the data size,
press . You can also change the data size by highlighting the data
EXIT
you want to change on the Overlay Data Shown menu and pressing
This will bring up the data information menu. Use ↓ to select
ENT.
overlay size, then press . Select the desired data size, then press
ENT
| | to return to the main screen.
EXIT EXIT EXIT

Overylay Data Style

Do you like a digital readout or do you prefer an analog gauge look?
With the Overlay Style feature, you can mix and match your data to
suit your viewing preferences.
To access overlaid data style menu: press | to
↓
MENU O
VERLAY
| . This will bring up the Overlay Data Shown menu with a list
D ENT
ATA
of current overlay data. Highlight the data you want to change on the
Overlay Data Shown menu and press which will launch the data
ENT,
information menu. Use ↓ to select overlay style, choose analog, and
. Next, press → to enter Analog Setup, which will place a
press
ENT
gauge on the display instead of digital numbers.
The GlobalMap Baja Data Information menu (left) with the Overlay
style window activated. After choosing analog, the Analog Setup but-
ton appears (right).
92