Once in the Sounds menu:
To set Key Press Sounds: With the option highlighted, press
to
ENT
check it (turn on) and uncheck it (turn off). After the option is set, press
to return to the page display.
EXIT|EXIT
To set Alarm Sounds: Press ↓ to
With the option high-
A
S
.
LARM
OUNDS
lighted, press
to check it (turn on) and uncheck it (turn off). After
ENT
the option is set, press
to return to the page display.
EXIT|EXIT
To set Alarm Volume: Press ↓ to
. Press → or ← to move the
V
OLUME
bar. The left end of the scale is low volume; the right end is high volume.
After the option is set, press
to return to the page display.
EXIT|EXIT
To set Alarm Style: Press ↓ to
. Press ↑ or ↓ to
|
A
S
ENT
LARM
TYLE
change the style, then press
. After the option is set, press
ENT
EXIT|EXIT
to return to the page display.
Track Smoothing
This is a factory setting on the GPS Setup menu that should always be
left on. When stopped or traveling at slow speeds (such as walking or
trolling), Track Smoothing prevents wandering of trails, the steering
arrow, compass rose and a map in track-up mode.
Track Smoothing option, turned on.
Trail Options
There are several options you can use with trails. Some affect all trails,
other options can be applied to a particular trail. You can change the
way trails are updated, you can display or hide trails, create a new
trail, delete a trail, etc.
128