Map Data; Show Map Data; Pop-Up Map Information; Map Boundaries - Lowrance GlobalMap 3300C Installation And Operation Instructions Manual

Map Data

This menu lets you turn the map off, if desired (which turns the map
screen into a GPS plotter); turn off or on the pop-up map info boxes;
draw the map boundaries or boxes around the areas of high detail; or
fill land areas with gray. You can also turn on or off Map Overlays,
which display latitude and longitude grid lines or range rings on the
map. This menu lets you select Navionics Maps; for instructions, see
the Navionics Charts entry in this section.
To get to Map Data:
From the Map Page, press

Show Map Data

From the Map Page, press
the
E M
ARTH AP
want, from Off (so the unit operates like a GPS plotter) to High. After
the option is set, press

Pop-up Map Information

From the Map Page, press
M I
AP NFORMATION
on) and uncheck it (turn off.) After the option is set, press
return to the page display.

Map Boundaries

From the Map Page, press
M B
AP OUNDARIES
on) and uncheck it (turn off.) After the option is set, press
return to the page display.
MENU
Map Menu, left, Map Data Menu, right.
MENU
selection list, and choose how much detail you
D
ETAIL
repeatedly to return to the page display.
EXIT
MENU
. With the option highlighted, press
MENU
. With the option highlighted, press
|↓ to
M D
AP ATA
|↓ to
M D
AP ATA
|↓ to
M D
AP ATA
|↓ to
M D
AP ATA
82
| .
ENT
| . Press
ENT ENT
. Press ↓ to
|
ENT
to check it (turn
ENT
EXIT
. Press ↓ to
|
ENT
to check it (turn
ENT
EXIT
to enter
P
OPUP
| to
EXIT
D
RAW
| to
EXIT