Map Data; Show Map Data; Popup Map Information - Lowrance iFINDER PhD Operation Instructions Manual

First, start navigation to a waypoint. (See the waypoint section for
more information on navigating to a waypoint.) Then, with the auto
zoom mode on, the unit zooms out until the entire course shows, from
the present position to the destination waypoint. As you travel toward
the destination, the unit automatically begins zooming in — one zoom
range at a time — always keeping the destination on the screen.
To turn this feature on, from the
| . Repeat these steps to turn it off.
Z ENT
OOM

Map Data

This menu lets you turn the map off, if desired (which turns the map
screen into a GPS plotter); turn off or on the pop-up map info boxes;
draw the map boundaries or boxes around the areas of detail; or fill
land areas with gray. You can also turn on or off Map Overlays, which
display latitude and longitude grid lines or range rings on the map.
This menu lets you select Navionics Maps; for instructions, see the
Navionics Charts entry in this section.
To get to Map Data:
1. From the Map Page, press

Show Map Data

Press |↓ to
MENU
selection list, and choose how much detail you want, from Off (so the
unit operates like a GPS plotter) to High. After the option is set, press
to return to the page display.
EXIT

Popup Map Information

Press |↓ to
MENU
option highlighted, press
off.) After the option is set, press
MENU
Map Data Menu.
|
M D ENT
AP ATA
|
M D ENT
AP ATA
to check it (turn on) and uncheck it (turn
ENT
M P
AP AGE
|↓ to
M D
AP
. Press to enter the
ENT
. Press ↓ to
P
to return to the page display.
EXIT
68
, press
MENU
| .
ENT
ATA
E
ARTH
I
OPUP NFORMATION
|↓ to
A
UTO
M D
AP ETAIL
. With the