Lowrance GlobalMap 3300C Installation And Operation Instructions Manual page 123

4. To see location information on the closest (highlighted) waypoint,
press and the Waypoint Information screen appears. (If you
ENT
wanted to, you could select another waypoint from the list with the ↑ or
↓ keys.)
A. To navigate to the waypoint, press
command is already highlighted.) The unit will show navigation in-
formation to the waypoint.
B. To find the waypoint, press → to
Page appears with the cursor highlighting the found waypoint.
Waypoint Information screens with the Go To Waypoint command se-
lected, left, and the Find on Map command selected, right.
To clear these menus and return to the previous page, press
peatedly.
5. If you're looking by name, there are two options: A. You can spell
out the name in the top selection box. Press ↑ or ↓ to change the first
letter, then press → to move the cursor to the next letter and repeat
until the name is correct, then press
down to the lower selection list by pressing
select a waypoint from the list, then press
tion screen appears.
ENT
F
IND
|
ENT ENT
ENT
. The waypoint informa-
ENT
117
. (The Go To Waypoint
| . The Map
O M ENT
N AP
. B. Or you can jump
, then press ↓ or ↑ to
re-
EXIT