Front Turn Signal; Front Fog Lamps - Dodge Durango 2014 Owner's Manual

Hide thumbs Also See for Durango 2014:
Table of Contents

Advertisement

CAUTION!
Do not touch the new bulb with your fingers. Oil
contamination will severely shorten bulb life. If the
bulb comes in contact with any oily surface, clean the
bulb with rubbing alcohol.

Front Turn Signal

1. Open the hood.
2. Turn the turn signal bulb one–quarter turn counter-
clockwise to remove from housing.
3. Disconnect the electrical connector and replace the
bulb.
MAINTAINING YOUR VEHICLE 613
CAUTION!
Do not touch the new bulb with your fingers. Oil
contamination will severely shorten bulb life. If the
bulb comes in contact with any oily surface, clean the
bulb with rubbing alcohol.

Front Fog Lamps

1. Reach through the cutout in the splash shield and
rotate the bulb's electrical connector one-quarter turn
counterclockwise and remove it from the fog lamp
housing.
2. Remove the bulb from the connector and install the
replacement bulb.
3. Install the bulb and connector assembly into the fog
lamp housing and rotate the connector one-quarter
turn clockwise to lock it in place.
7

Advertisement

Table of Contents
loading

Table of Contents