Front Turn Signal/Parking Lamps - Dodge RAM 2016 Owner's Manual

16. Carefully reinstall screw (1) on lower headlamp filler
panel.
17. Carefully reinstall screws (2) on upper headlamp
filler panel.

Front Turn Signal/Parking Lamps

NOTE: Passenger side headlamp must be removed for
bulb replacement, for driver side headlamp go to step 6
through step 7.
1. Remove screw (1) on lower headlamp filler panel.
2. Remove screws (2) on upper headlamp filler panel.
3. Remove upper screw (1) from headlamp housing.
4. Remove lower screws (2) from headlamp housing.
5. Pull Headlamp forward.
6. Rotate the bulb counter clockwise and remove.
7. Install the bulb into socket, and rotate bulb/socket
clockwise into lamp locking it in place.
8. Carefully reinstall headlamp in the same position on
the vehicle, so as not to affect headlamp aiming.
9. Install upper screw (1) on headlamp housing.
10. Install lower screws (2) on headlamp housing.
11. Carefully reinstall screw (1) on lower headlamp filler
panel.
12. Carefully reinstall screws (2) on upper headlamp
filler panel.
I n f o r ma t i o n P r o v i d e d b y :
MAINTAINING YOUR VEHICLE 407
7