Dodge Durango 2014 Owner's Manual page 376

374 UNDERSTANDING YOUR INSTRUMENT PANEL
Display Settings menu. These settings control the appear-
ance of the video on the screen. The factory default
settings are already set for optimum viewing, so there is
no need to change these settings under normal circum-
stances.
To change the settings, press the remote control's naviga-
tion buttons ( , ) to select an item, then press the remote
control's navigation buttons ( , ) to change the value for
the currently selected item. To reset all values back to the
original settings, select the Default Settings menu option
and press the remote control's ENTER/OK button.
Disc Features control the remote Blu-ray™ Disc player's
settings of DVD being watched in the remote player.
Listening To Audio With The Screen Closed
To listen to only audio portion of the channel with the
screen closed:
• Set the audio to the desired source and channel.
• Close the video screen.
• To change the current audio mode, press the remote
control's SOURCE button. This will automatically se-
lect the next available audio mode without using the
Mode/Source Select menu.
• When the screen is reopened, the video screen will
automatically turn back on and show the appropriate
display menu or media.
If the screen is closed and there is no audio heard, verify
that the headphones are turned on (the ON indicator is
illuminated) and the headphone selector switch is on the
desired channel. If the headphones are turned on, press
the remote control's power button to turn audio on. If
audio is still not heard, check that fully charged batteries
are installed in the headphones.