Using Homelink; Security; Troubleshooting Tips - Dodge Durango 2014 Owner's Manual

Hide thumbs Also See for Durango 2014:

Table of Contents

252 UNDERSTANDING THE FEATURES OF YOUR VEHICLE

"Canadian/Gate Operator Programming" step 2 and

follow all remaining steps.

Using HomeLink®

To operate, press and release the programmed

HomeLink® button. Activation will now occur for the

trained device (i.e., garage door opener, gate operator,

security system, entry door lock, home/office lighting,

etc.,). The handheld transmitter of the device may also be

used at any time.

It is advised to erase all channels before you sell or turn

in your vehicle.

To do this, press and hold the two outside buttons for

20 seconds until the red indicator flashes. Note that all

channels will be erased. Individual channels cannot be

The HomeLink® Universal Transceiver is disabled when

the Vehicle Security Alarm is active.

If you are having trouble programming HomeLink®,

here are some of the most common solutions:

• Replace the battery in the original transmitter.

• Press the LEARN button on the Garage Door Opener

to complete the training for a Rolling Code.

• Did you unplug the device for training, and remember

to plug it back in?

If you have any problems, or require assistance, please

call toll-free 1-800-355-3515 or, on the Internet at

www.HomeLink.com for information or assistance.

Chapters

Table of Contents