Replacing Milk Regulator Assembly; Reassembly And Wiring Instructions - Gran Maestria - Nespresso Maestria EF 285 Service Manual

7.5.5 Replacing milk regulator assembly

821
• Unplug connector for milk regulator (821) from electronic mainboard (806).
• Remove 3 cable clips (111) from holder (1) by pressing the retention latches
inwards.
• Loosen 3 screws (TX 10) and remove milk regulator (821).
Assembly checkpoint
• Use cable guides on holder for milk regulator (77) and cable clips (111) to secure
wires.

7.5.6 Reassembly and wiring instructions - Gran Maestria

Reassembly checkpoints
• Check if light guide (115) is mounted before attaching upper part of housing (114).
• Check if permanent magnet (142) for drip tray is inserted in base (141). Remove
mounting aid (additional magnet) if present.
• Take care not to jam any wires between base and upper part (especially wiring of
electronic main board).
111
Maestria / Gran Maestria service manual
R E P A I R S
77
Do not lose cable
clips!
83