The Sysko pump is
shown as example.
Position numbers of
the Ulka / Ceme pump and
its accessory are indicated
in brackets.
56
R E P A I R S
Remove coffee pump assembly with flow meter
•
Pull fluid connection clip (58) and remove pressure hose from outlet of pump (805 /
811).
14
•
Remove wires from cable guide on lower pump holder (14).
•
Unplug flat receptacle of pump wire from electronic mainboard (see "Replacing elec-
tronic mainboard (Maestria)" on page 49).
•
Remove flat receptacle from pump.
Maestria / Gran Maestria service manual
58
805
(811)