Nespresso Maestria EF 285 Service Manual page 35

Check Error symptoms
4 Switch on coffee 4.3 Coffee machine
machine with ON/ does not get ready
OFF button (con- but stays in error
tinued) mode (continued)
5.1 Middle LED for
steam nozzle does
not blink white?
5 Turn steam lever
to position ON
(check steam cir-
5.2 Middle LED for
cuit)
steam nozzle does
not light white but
continues blinking?
6.1 Steam handle is in
"steam" position.
No steam flows out
of steam pipe.
6 Test function of
pumps
6.2 Set dial of Lungo
push/turn control to
position 5 and
press Lungo but-
ton.
No water flows out
of coffee outlet.
T R O U B L E S H O O T I N G
Measure /
repair work
One or both LEDs above
Espresso and Lungo push/turn
controls do not light up green?
YES
- check micro switches at
steam valve
- check electronics
NO - continue
YES
- check wiring
- check temperature sensor
(on thermoblock for steam)
- check thermo fuses
(on thermoblock for steam)
- check thermoblock for steam
- check electronics
NO - continue
6.1.1 Pump does not start?
6.1.2 Pump starts?
6.2.1 Pump does not start?
6.2.2 Pump starts?
Maestria / Gran Maestria service manual
Further measures /
repair work
YES
- check Espresso / Lungo
push/turn control modules
- check electronics
NO - continue
Replace damaged parts
Replace damaged parts
YES
- check micro switches on
steam valve
- check pump (steam circuit)
- check electronics
NO - continue
YES
- check water tank, water tank
valve and connector
- check tubing for leaks or
clogging
- check steam pipe
- check pump (steam circuit)
- check if thermoblock for
steam is calcified
- check if steam valve is
calcified
Continue
YES
- check thermal cut-out (limitor)
on pump
- check Lungo push/turn
control module
- check wiring
- check electronics
NO - continue
YES
- check tubing for leaks or
clogging
- check pump
(water circuit)
- check flow meter
- check if thermoblock for
coffee is calcified
- check brewing unit and its
check valve
Continue
35