Using A Hot Folder; Configuring The Workflow; Configuring The Hot Folder - THOMSON ViBE VS7000 User Manual

Chapter 3 'Web Browser Interface' — Basic Settings

Using a Hot Folder

Configuring the Workflow

Configuring the Hot Folder

60
a
To know how to make links between parameters, refer to
Tool' on page 107.
3. Apply the configuration.
4. Launch a job based on your workflow.
Create the workflow that you wish to apply on the files that will be placed
on the hot folder. For instance, use the workflow procedure given in
Section 'Encoding a File'
1. Go to the System
2. Edit the configuration.
3. Click the button and add a hot folder.
4. Choose from the list the workflow you wish to apply on the files that
will be placed in the hot folder.
5. Set the public parameters of the workflow.
6. Apply the configuration.
Figure 3-31. Configuring the hot folder
1. Add
on page 57.
tab and choose the Hot folder
3. Set the workflow parameters
Section 'Link
category.
4. Apply
2. Set the
hot folder
parameters
ViBE VS7000
User Manual