Configuring The Interconnect Bays; Saving Your Configuration - THOMSON ViBE VS7000 User Manual

Chapter 7 'Tools' — HP Monitoring Tools (6RU and 10RU Devices)

Configuring the Interconnect Bays

Saving your Configuration

192
Figure 7-14. Accessing the HP Virtual Connect Manager interface
3. Enter the user name and password of the interconnect bay and click
Sign in.
Interconnect bays are delivered with a default configuration, described in
Section 'Detailed Factory Network Configuration'
need to modify it, read the information below.
The ViBE VS7000 product requires an internal system network for
communication between the blades. This network must be linked to the
first interface of each blade. You must perform the first IP configuration
via this network.
Once you are logged in, perform the following global steps:
1. In the Ethernet networks category, define the LANs.
2. Assign the LANs to the output ports.
3. Modify the server profiles so that they see these networks.
When your configuration is complete, connect the Ethernet cables to the
interconnect bays.
When your configuration of the interconnect bays is complete, you may
want to save it to a file for backup purposes. To do so:
1. From the HP Management Console, in the tree menu on the left, under
Domain Settings, choose Backup/Restore.
on page 253. If you
ViBE VS7000
User Manual