Method #2: Connecting On The Dhcp Network Using The Ip Address Of The Device - THOMSON ViBE VS7000 User Manual

Method #2: Connecting on the DHCP Network
using the IP Address of the Device
ViBE VS7000
User Manual
Chapter 7 'Tools' — HP Monitoring Tools (6RU and 10RU Devices)
Figure 7-5. HP configuration interface – welcome page
If you have a DHCP server but you do not have a DNS server, you can
retrieve the IP address of the blade center from the front panel and use it
to connect to the equipment via the DHCP network.
To do so:
1. On the front panel of the ViBE VS7000 device, press
display.
Figure 7-6. ViBE VS7000 front panel screen – Main menu
OK to activate the
187