Table of Contents
Advertisement
Modifying a Workflow from a Text Editor
Exporting Logs
Using the Console
Providing Remote Access to the ViBE VS7000 System
ViBE VS7000
User Manual
Chapter 5 'Troubleshooting' — Troubleshooting Procedures
If needed, you may perform some changes in the code, and then import
them back in the GUI to apply your changes. To do so:
1.
Follow the steps described above to export the workflows
configuration to a zip file.
2.
Find the XML file corresponding to the workflow you wish to modify
and extract it from the zip.
3.
Open the XML file in a text editor.
4.
Perform your changes.
5.
Re-include the XML file of the workflow in the original ZIP file.
6.
In the lower-right corner of the GUI, click
The modified workflow is now available in the list of workflows.
To export logs, proceed as follows:
1.
From the GUI, open the
2.
Select the
Logs
category.
3.
From the
Export
immediately.
A text file is generated with all the logs stored in the database.
For more information on the export feature, refer to
page 78.
The
Console
tab is available only if you are logged with an administrator
account. It is described in
This tab should be used only under the customer support's
supervision. If needed, the customer support team will indicate the
commands to send.
The remote access must accept remote access of SSH type and Web
type, for example via a VPN.
System
tab.
area, click the
Export now
Section 'Console'
Import
and select the ZIP file.
button to export the logs
Section 'Export'
on page 98.
on
167
- Quick Links:
- Product Overview
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
