Message Playback; Options During Playback - AT&T CL83143 Abridged User Manual

Answering system

Message playback

To listen to messages at the telephone base:
Press /PLAY/
message playback.
To listen to messages on a cordless handset:
1. When the handset is in idle mode, press MENU/
/SELECT again to select Play messages.
2. Press
MENU
If there are new and old messages, press q
•
Play new msgs or Play old msgs, then press
• If there are only new or only old messages, they will play automatically.

Options during playback

When messages are playing on the telephone base:
Press q/VOLUME/p to adjust the message playback volume.
•
• Press /SKIP to skip to the next message.
• Press /REPEAT to repeat the message. Press twice to hear the
previous message.
Press X/DELETE to delete the message.
•
/
• Press
PLAY
/SPEAKER to stop playback. The screen shows Call back?, then
• Press
press /SELECT,
MENU
number is available. If the dialing format used is not correct, then use the
option, as mentioned below, to choose the correct dialing format before
calling back the caller.
• Press /SELECT to pause playback and show the caller ID information if
MENU
available. From here, you can press
(pound key) repeatedly to show the desired dialing option, then press
/SPEAKER to call back the caller. If you do not call back within ten
seconds, message playback resumes automatically.
/
. Press
STOP
/STOP to stop playback.
or /SPEAKER to call back the caller if the caller's
/STOP again to end the
PLAY
SELECT
CANCEL to resume playback, or press #
47
to enter the main menu.
or p
to select
CID DIR
SELECT.
MENU/