Set Date/Time - AT&T CL83143 Abridged User Manual

Telephone settings
Telephone base settings

Set date/time

The answering system announces the day and time of each message prior
to playing it. Before using the answering system, set the date and time as
follows. If you subscribe to caller ID service, the day, month and time are set
automatically with each incoming call. The year must be set so that the day of
the week can be calculated from the caller ID information.
1. When the telephone base is in idle mode, press MENU/
main menu.
2. Press q or
CID
3. Enter the month using the dialing keys.
4. Enter the day using the dialing keys.
5. Enter the year using the dialing keys, then press
set the time.
6. Enter the hour using the dialing keys.
7. Enter the minute using the dialing keys.
8. Press q or
CID
NOTE: If the clock is not set when a message is recorded, the system announces, "Time and
day not set," before it plays the message.
to scroll to Set date/time and then press
p
DIR
to select AM or PM, then press
p
DIR
MENU
17
to enter the
SELECT
/SELECT.
MENU
/SELECT to move on to
/SELECT to confirm.
MENU