AT&T CL83143 Abridged User Manual page 54

Answering system
Message playback
When messages are playing on the handset:
Press q /VOLUME or p
•
CID
playback volume.
Press EQ
•
Press 6 to skip to the next message.
•
Press 4 to repeat the message. Press twice to hear the previous message.
•
/DELETE to delete the message.
• Press
MUTE
Press 5 or
•
/SPEAKER to switch between speakerphone mode and
• Press
handset mode.
• Press PHONE/
press /SELECT,
MENU
if the caller's number is available. If the dialing format used is not correct,
then use the option, as mentioned below, to choose the correct dialing
format before calling back the caller.
/SELECT to pause playback and show the caller ID information
• Press
MENU
if available. From here, you can press
or press # (pound key) repeatedly to show the desired dialing option, then
PHONE/
press
ten seconds, message playback resumes automatically.
DIR
to adjust the message playback audio quality.
/CANCEL to stop playback.
OFF
to stop playback. The screen shows Call back?, then
FLASH
PHONE/
to call back the caller. If you do not call back within
FLASH
/ VOLUME to adjust the message
or /SPEAKER to call back the caller
FLASH,
/CANCEL to resume playback,
OFF
48