Samsung SVR-1650 User Manual page 28

3. External control equipment (RS-422/485)
This is a terminal for connecting external control equipment.
The switch labeled TERM is used to turn ON/OFF terminating resistance for RS–422/485 communication
equipment.
PORT
PORT A
(Controller
SCC-3100 Control)
PORT B
(Speed Dome Control)
TERM 1 switch controls PORT A, TERM 2 Switch controls PORT B
1, 2 : ON → RS-485 MODE, OFF .→ RS-422 MODE
3, 4 : ON → Termination On, OFF → Termination Off
26
No. RS-422
1 RX+ (+Data Receive)
2 RX- (-Data Receive)
3 N/C (Not connected)
4 N/C (Not connected)
5 GND(Ground)
6 N/C (Not connected)
7 Tx-(-Data Send)
8 Tx+(+Data Send)
9 Rx+(+Data Receive)
10 Rx-(-Data Receive)
11 N/C (Not connected)
12 N/C (Not connected)
13 GND(Ground)
14 N/C (Not connected)
15 Tx-(-Data Send)
16 Tx+(+Data Send)
RS-485
Data+
Data-
N/C (Not connected)
N/C (Not connected)
GND(Ground)
N/C (Not connected)
Data-
Data+
Data+
Data-
N/C (Not connected)
N/C (Not connected)
GND(Ground)
N/C (Not connected)
Data-
Data+