Back Connector Terminals - Samsung SVR-1650 User Manual

2.3.2 Back connector terminals

1
2
SENSOR IN
RELAY OUT
9 10
No. I/O terminal names
1 CH1~16
2 LOOP OUT
3 RS-232C
4 MONITOR A2
5 MONITOR A1
6 MONITOR B
7 GROUND
8 POWER IN
9 SENSOR IN
10 RELAY OUT
11 CONSOLE
12 RS-485/422
13 TERMINATION
14 USB
15 VGA OUTPUT
16 ETHERNET(Main)
17 AUDIO OUT
18 AUDIO IN
Refer to 'Chapter 3. Installation method' and 'Chapter 4. Operation method' for
detailed description about setup and utilization.
Because console terminal is a reserve terminal, a user may not connect it
arbitrarily.
14
1 2 3 4
CONSOLE
12
11
13
BNC input connector terminal for the camera.
BNC output (loop) connector terminal for the camera.
RS-232C terminal.
BNC connector terminal for monitor output.
BNC connector terminal for monitor output.
BNC connector terminal for SPOT monitor output.
Ground terminal for DVR main body and external equipment.
Socket for AC100V ~ AC240V power supply cord.
Input terminal for external alarm sensor.
Relay output terminal.
Auxiliary port
Terminal to connect expansion controller, speed dome camera,
SRX-100B connector.
Switch for RS-485 termination resistor setup.
Terminal to connect external equipment
(DVD+RW, CD-RW, etc.).
Output port to connect the PC monitor.
LAN connection terminal.
Terminal for speaker output.
Terminal for microscope input.
5
3 4
1 2 3 4
14 15
17
16
Function
8
6 7
18