Loewe Spheros 32 HD Operating Instructions Manual page 30

Connecting the DVD Preceiver Auro 8116 DT and Tremo
Connecting the Loewe DVD Preceiver Auro
8116 DT to the Signal Box Spheros 32/37
HD or Xelos SL 32/37 HD
When you use the Loewe DVD Preceiver in
connection with a Loewe TV set, connect the
Tremo loudspeaker system to the audio outputs
of the DVD Preceiver.
Power OUT
R
Surr.
L
R
Front C
Bass Intensity
L
Min.
Center to
Line IN
Sat TV
Right Subw. Left
Surr.
Slave
Front
Right Center Left
System connector
Master
30
31963_021_RC3_GB
Connect the cubic socket on the DVD Preceiver
to the "Master" cubic socket on the Tremo
subwoofer. Use the cubic plug cable enclosed
with the DVD Preceiver Auro (2-wire cable).
Plug the white plug (without kink protection) in
the cubic socket on the subwoofer.
If the loudspeakers of the Loewe TV set are
used for center reproduction, connect the cubic
socket of the TV set to the "Slave" cubic socket
on the subwoofer with the cubic plug cable.
Use the cubic plug cable enclosed with the
Tremo loudspeaker system. Plug the white plug
(without kink protection) into the cubic socket
on the subwoofer. Set the switch "Center to"
on the subwoofer to "TV".
If on the other hand you want to use the
external center loudspeaker, do not connect
Slave to the TV.
Set the "Center to" switch on the subwoofer to
"Sat".
ON
Connect the TV set (Euro AV socket 2) and the
DVD Preceiver with the Euro-AV cable.
OFF
Max.
Phase
0 180
ANT-1
ANT-2
230V~50/60Hz
PIP UHF/VHF
L
AUDIO OUT
PREOUT
FL C FR
SL SUB SR
30
AV 1
AV 2 ( RGB )
DIGITAL
IN1 IN2
AUDIO IN1
L R
Y
C /P
R R
R L R L R Center Sub
AUDIO IN 3 SOURROUND
SERVICE RC5/ IR- AUDIO
SYSTEM
RC6 Link IN 2
AUX1 IN AUX OUT AUX 2
L L
DIGITAL
IN
DIGITAL
OUT
R R TV EXT
12V/15mA
L-Link
14.01.2005, 10:40 Uhr
Connect the TV set (Service socket) to the TV-L-
Link socket of the DVD Preceiver with the L-
Link cable (delivered with the DVD Preceiver) .
This ensures that the Tremo loudspeaker system
is switched on during radio or CD playback
from the DVD Preceiver but the TV remains
switched off.
Connect the digital output of the TV set with
the DIGITAL IN input of the Auro system with a
cinch cable. This ensures that the digital audio
signal for decoding is fed into the DVD
Preceiver.
See the "Tremo" operating manual to find out
how to connect the satellite loudspeaker.
Settings on the DVD Preceiver Auro
8116DT
Select the "Tremo" loudspeaker system in the
DVD menu under Settings, set the Listener/
Speaker distances and level the speakers. Also
have a look at the DVD Preceiver manual
(pages 12 and 13).
VGA
120-240V
OUT
50/60Hz
CONTROL
C /P
B B
DVI-INPUT D-SUB DVI-OUTPUT
DISPLAY
AM GND FM (75 Ω)
TO TV