Maintenance; Optional Equipment; Recycling; Warranty - Jøtul C 24 Installation And Operation Instructoins

english

7.0 Maintenance

7.1 Cleaning and soot removal
Soot deposits may build up on the internal surfaces of the
fireplace during use. Soot is an insulator and will therefore
reduce the fireplace's heat output. If soot deposits accumulate
when using the product, they can easily be removed by using a
suitable detargent.
In order to prevent a layer of water and tar from forming in the
fireplace, you should regularly allow the fire to burn hot in order
to remove the layer. Your product should be cleaned internally
once a year to ensure the best heating effect. It is a good idea to
do this when cleaning the chimney and flue pipes.
7.2 Sweeping the flue pipe to the
chimney
Flue pipes must be swept through the flue pipe sweeping hatch
or through the door opening. The side burn plates, baffle and
exhaust deflector must be removed first (see Chapter 6.2).
7.3 Inspection of the fireplace
Jøtul recommends that you carefully inspect your fireplace
yourself after it has been swept/cleaned. Check all visible surfaces
for cracks. Also check that all joints are sealed and that the gaskets
are in the correct position. Any gaskets showing signs of wear or
deformation must be replaced.
Thoroughly clean the gasket grooves, apply ceramic glue
(available from your local Jøtul dealer) and press the gasket well
into place. The joint will dry quickly.
7.4 Exterior maintenance
Painted products may change colour after they have been used
for several years. The surface should be cleaned and brushed free
of any loose particles before new paint is

8.0 Optional extras

Frame, wide
(Cat. no. 50044778)
Fan
(Cat. no. 50044779)
Kit for outside air connection Ø 100 mm
(Cat. no. 51042164)
Smoke outlet adapter
(Cat. nr. 51044856)
20

9.0 Recycling

9.1 Recycling packaging
Your fireplace is delivered with the following packaging:
9.2 Recycling the fireplace
The fireplace is made of:
• Metal that should be taken to a local recycling facility.
• Glass that should be disposed of as hazardous waste. The
• Vermiculite burn plates that can be disposed of in regular

10.0 Warranty

Jøtul AS provides its customers with a ten-year warranty with the
right to return external cast-iron items if they show defects as a
result of faulty materials and/or manufacturing after the initial
purchase/installation of the fireplace. The buyer is entitled to
return the goods provided that the fireplace has been installed in
compliance with current laws and regulations and in compliance
with Jøtul's installation and operating instructions.
The warranty does not cover:
The installation of optional extras, for example, to rectify local
draught conditions, air supply or other circumstances beyond
Jøtul's control. The warranty does not cover consumables, such
applied.
as burn plates, smoke baffles, fire grates, bottom grates, brick
refractories, dampers and gaskets as they deteriorate over time
due to normal wear and tear. The warranty does not cover damage
caused as a result of using unsuitable fuel when lighting the fire,
such as driftwood, impregnated and painted wood, plank offcuts,
chipboard, etc. Overheating may easily occur if unsuitable fuel is
used, i.e. the fireplace becomes red hot, which causes the paint
to discolour and the cast iron parts to crack.
The warranty is not valid for damage caused while the product
is in transit from the distributor to the delivery address. The
warranty is not valid either for damage caused by the use of
non-original parts.
• A wooden pallet that can be cut up and burned in the
fireplace.
• Cardboard packaging that should be taken to a local recycling
facility.
• Plastic bags that should be taken to a local recycling facility.
glass in the fireplace must not be placed in a regular source
segregation container.
waste containers.