System Menu - PRESONUS StudioLive AI-Series Owner's Manual

5 Digital Effects | Master Control
5.5

System Menu

System Menu
5.5
In most digital-console manuals, the phrase "System menu" inspires
a sense of dread. However, with the StudioLive, you have nothing
to fear. The System menu on the StudioLive serves just a few simple
functions, most of which have little to do with mixing a show.
Like the Scene and FX Menus, the StudioLive remembers on which page
of the System menu you were when you navigated away. To quickly
jump to page 1, simply press and hold the Tap Tempo button.
Press the System button to access the System menu.
Global
Network
You do not need to enter the network name if you are hardwiring your
StudioLive to the wireless network using an Ethernet cable.
For more information on wireless and wired networks and using a laptop, iPad,
or iPhone/iPod touch to remote control a StudioLive, please review "Networking
your StudioLive Mixer" in the StudioLive AI-Series Software Library Manual.
Note: Only the wireless adapter that was included with your StudioLive AI is
supported. This adapter must be connected to the USB port on the top of your
StudioLive before you power on your mixer for wireless remote control to function.
The first page allows you to adjust the LCD Contrast and LCD
Backlight for optimal viewing in your working environment.
These settings are retained when the unit is powered down.
From the Global page, you can also change
the Solo mode. For more information on this
feature, please review Section 4.9.
As previously mentioned, your StudioLive offers
both Peak and Peak Hold metering. To view the
Peak Hold, simply turn this preference On.
Press the Pg Dn button to access the Network page. The
StudioLive AI-series mixers ship with a USB wireless adapter
that allows you to connect to any Wi-Fi network. To connect
to your wireless network, use the Value encoder to scroll
through the available networks. Navigate to the password
field and follow the same steps you used to create a preset or
scene name (see Section 4.1.10) to enter the password. When
you are done, press the Store button. This will store the
network information in your StudioLive and make the
network the default to which your StudioLive will try
to connect.
StudioLive™ 32.4.2AI
Owner's Manual
77