PRESONUS StudioLive AI-Series Owner's Manual page 15

3 Hookup
3.1 Rear-Panel Connections
Aux Outputs. The StudioLive is equipped with 14/10/6 auxiliary outputs. Aux mixes
are routed to these outputs. In Section 4.4.5 and 4.4.6, we discuss in detail how to
create aux mixes for monitoring and effects processing.
Power User Tip: All StudioLive main outputs (XLR stereo, TRS stereo, and XLR mono)
are active all of the time. Therefore, you can send your main mix to five speakers
at the same time. This can be especially useful when you need to send a mix to
another room or add another set of speakers to accommodate a larger venue.
Talkback Mic Input. The StudioLive does not have an onboard
talkback mic; an external mic must be used. Phantom power is
always enabled on the Talkback microphone preamp, so either a
dynamic or a condenser microphone can be used. However, we
recommend reviewing the documentation that came with your
dynamic microphone to verify that phantom power will not harm it.
Power User Tip: The Talkback microphone preamp is the same high-quality
XMAX preamp that is featured on StudioLive channel mic inputs. The Talkback
input can also be selected as a recording input. See "Auxiliary Digital
Sends" in the StudioLive AI-Series Software Library Manual for details.
Talkback Mic Level. This is the trim control for your talkback microphone.
It adjusts the gain of the talkback input.
Mono Output. This balanced output carries a mono, summed
version of the stereo signal from the Main bus.
Mono Output Level. This knob controls the maximum level of the Mono
Output signal. The signal can be attenuated to -80 dB and boosted up to
+6 dB.
StudioLive™ 32.4.2AI
Main Output. The StudioLive features
both XLR and TRS main outputs.
These outputs are parallel to each
other and to the mono output.
Main Output Level. This knob
controls the maximum output level
of the XLR and TRS main outputs.
The signal can be attenuated to
-40 dB and boosted up to 0 dB.
Owner's Manual
11