PRESONUS StudioLive AI-Series Owner's Manual page 87

Digital mixing system with active integration™
Hide thumbs Also See for StudioLive AI-Series:
Table of Contents

Advertisement

6
Resources
6.1
Stereo Microphone Placement
Drum Overheads (XY example)
Snare Drum (top and bottom)
Point a dynamic microphone at the center of the snare, making sure it is
placed so that the drummer will not hit it. Place a small-diaphragm condenser
microphone under the drum, pointed at the snares. Experiment with the
placement of both microphones. Also experiment with inverting the phase of the
bottom microphone. This technique can be used in live applications.
StudioLive™ 32.4.2AI
Owner's Manual
Place two small-diaphragm
condenser microphones on an XY
stereo-microphone holder (bar).
Position the microphones so that
each one is at a 45-degree angle,
pointed down at the drum kit,
approximately 7 or 8 feet above the
floor or drum riser. Experiment with
height. This technique can be used in
live applications as well.
83

Advertisement

Table of Contents
loading

Table of Contents