Cadillac SRX 2012 Owner's Manual page 311

Hide thumbs Also See for SRX 2012:
Table of Contents

Advertisement

TCS is on whenever the vehicle
is started. To limit wheel spin,
especially in slippery road
conditions, the system should
always be left on. But, TCS
can be turned off if needed.
d
flashes to indicate that the
traction control system is active.
If there is a problem detected
with TCS, SERVICE TRACTION
CONTROL and SERVICE
STABILITRAK may be displayed on
the Driver Information Center (DIC)
d
and
will be on. See Ride Control
System Messages on page 5 37.
When this message is displayed
d
and
comes on and stays on,
the vehicle is safe to drive but the
system is not operational. Driving
should be adjusted accordingly.
Notice: Do not repeatedly brake
or accelerate heavily when TCS is
off. The vehicle's driveline could
be damaged.
d
If
comes on and stays on, reset
the system by:
1. Stopping the vehicle.
2. Turning the engine off and
waiting 15 seconds.
3. Starting the engine.
d
If
still comes on and stays on at a
speed above 20 km/h (13 mph), see
your dealer for service.
A chime may also sound when the
light comes on steady.
g
The
is located on the console.
I n f o r ma t i o n P r o v i d e d b y :
Driving and Operating
The TCS off light comes on and
TRACTION CONTROL OFF is
displayed on the Driver Information
Center (DIC) to indicate that the
traction control system has been
turned off. See Ride Control System
Messages on page 5 37.
TCS can be turned off by pressing
g
and releasing
. When TCS is
i
turned off,
comes on and the
system will not limit wheel spin.
Driving should be adjusted
accordingly. Press and release
again to turn the system back on.
When TCS is turned off on AWD
vehicles, the system may still make
noise. This is normal and necessary
with AWD hardware.
9-33
g

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents