Airbag Readiness Light - Cadillac SRX 2012 Owner's Manual

Hide thumbs Also See for SRX 2012:
Table of Contents

Advertisement

5-16
Instruments and Controls
If the Vehicle Information is
selected, a full page screen
displays at start-up the three
safety belt symbols.
Once the passenger safety belt
is buckled, the corresponding
safety belt symbol in the DIC turns
green. There are no seat position
sensors in the seat, nor a safety belt
reminder sensor pad. If a safety belt
is not initially buckled, the cluster
continues to show the gray safety
belt icon.
While the vehicle is moving, if a
second row passenger who was
previously buckled becomes
unbuckled, a full screen warning
displays with the corresponding
safety belt indicator flashing red.
A chime may sound.
Acknowledge warning messages by
pressing any of the DIC buttons.

Airbag Readiness Light

This light shows if there is an
electrical problem with the airbag
system. The system check includes
the airbag sensor(s), passenger
sensing system, the pretensioners,
the airbag modules, the wiring, and
the crash sensing and diagnostic
module. For more information on the
airbag system, see Airbag System
on page 3 23.
The airbag readiness light comes
on for several seconds when the
vehicle is started. If the light does
not come on then, have the vehicle
fixed immediately.
I n f o r ma t i o n P r o v i d e d b y :
{
WARNING
If the airbag readiness light stays
on after the vehicle is started or
comes on while driving, it means
the airbag system might not be
working properly. The airbags in
the vehicle might not inflate in a
crash, or they could even inflate
without a crash. To help avoid
injury, have the vehicle serviced
right away.

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents