Network Mobility; (Nemo) - Cradlepoint MBR1400 Product Manual

MBR1400 | USER MANUAL – Firmware version 5.0
CRADLEPOINT
7.7 Network Mobility (NEMO)
NOTE: NEMO requires a feature license and hardware version 2.0.
Network Mobility (NEMO) is an Internet standards track protocol defined in
continuity for every node in a mobile network as the network moves.
This is a licensable feature. Without a valid license,
settings can be configured, but will not be implemented.
See System Settings → Feature Licenses for more
information.
NEMO requires a service provider, e.g.
Private Network with DMNR
Routing). Your NEMO service provider will define many
of the settings for your NEMO configuration.
Once you have a NEMO service provider and a valid
feature license, add networks to the Networks Routed
by NEMO section by first clicking Add. In the popup
window, input:
• Network Address
• Netmask
The Network Address and Netmask, or subnet mask,
together define a range of IP addresses that comprise
the local network you want associated with the NEMO
settings.
Network Mobility (NEMO) Settings
7.7.1
Home IP Address and Home Netmask – These may be
provided by your NEMO service provider. The IP address
is a placeholder, "dummy" address; any IP address can
be used (1.2.3.4 is common).
© 2013 CRADLEPOINT, INC.
Verizon Wireless
(Dynamic Mobile Network
PLEASE VISIT HTTP://KNOWLEDGEBASE.CRADLEPOINT.COM/
Go to System Settings → Feature Licenses to enable this feature.
RFC 5177. The protocol allows session
FOR MORE HELP AND RESOURCES PAGE 182