Device Alerts - Cradlepoint MBR1400 Product Manual

MBR1400 | USER MANUAL – Firmware version 5.0
CRADLEPOINT

8.2 Device Alerts

The Device Alerts submenu choice allows you to receive email notifications of specific system events. YOU MUST
ENABLE AN SMTP EMAIL SERVER TO RECEIVE ALERTS. Alerts can be included for the following:
• Firmware Upgrade Available: A
firmware update is available for this
device.
• System Reboot Occurred: This router
has rebooted. This depends on NTP
being enabled and available to report
the correct time.
• Unrecognized MAC Address: Used
with the MAC monitoring lists. An alert
is sent when a new unrecognized MAC
address is connected to the router.
• WAN Device Status Change: An
attached WAN device has changed
status. The possible statuses are
plugged, unplugged, connected, and
disconnected.
• Configuration Change: A change to the router configuration.
• Login Failure: A failed login attempt has been detected.
• VPN Tunnel Goes Down: Sends an alert when a VPN tunnel goes down.
• Full System Log: The system log has filled. This alert contains the contents of the system log.
• Recurring System Log: The system log is sent periodically. This alert contains all of the system events since the
last recurring alert. It can be scheduled for daily, weekly and monthly reports (Frequency). You also choose the
Time you want the Alert sent.
© 2013 CRADLEPOINT, INC. PLEASE VISIT HTTP://KNOWLEDGEBASE.CRADLEPOINT.COM/ FOR MORE HELP AND RESOURCES PAGE 232